Vehicle magnet production, first of all, the logo or message is meticulously prepared in graphic design programs and the best aesthetic appearance is provided. This prepared image is printed on a long-lasting foil that is resistant to outdoor conditions by digital printing method. The foil used must be resistant to water and sunlight and must have properties to protect the print quality. Foil printing is plastered onto the magnet thanks to its special adhesive surface and there are some important steps to be considered during this process.
During foil application, the adhesive surface of the foil should be wetted with plenty of water to prevent the formation of air bubbles during the bonding process. After the application is completed, excess water should be scraped off by pressing on the foil with a glass wiping rubber or a similar tool, thus obtaining a smooth surface. After this stage, it is recommended to let the magnet dry for 4-5 hours for durability. This is very important for the foil and magnet to ensure complete integrity and helps prevent deformations in long-term use.
There are also some points to be considered during the use of vehicle magnets. First of all, the surface of the vehicle where the magnet will be placed must be clean and dry. There should be no debris such as dust, oil or dirt on the bodywork that will prevent the magnet from adhering properly, as such factors can reduce the magnet's holding power and cause it to dislodge. In addition, care should be taken to ensure that the surface on which the magnet is adhered is not pitted or protruding; applying it on a flat surface provides an aesthetically neat appearance and prevents the magnet from falling off. Laths or elevations on the vehicle body surface may adversely affect the stability of the magnet, so flat and wide surfaces should be preferred as much as possible.
It is important to pay attention to these tricks to extend the life of vehicle magnets and make their use more efficient. Wholesale vehicle magnets, which will be exposed to weather conditions such as rain, wind and sun outdoors, offer a durable and aesthetic appearance for a longer period of time with the right production and application techniques.